Keyword Index

A

  • Abrasive waterjet machining Experimental study and modelling of abrasive water jet cutting of aluminum alloy 2024 [Volume 3, Issue 1, 2019, Pages 14-22]
  • Adaptive back-stepping control Adaptive back-stepping control applied on octocopter under recoil disturbance [Volume 1, Issue 1, 2017, Pages 12-21]
  • Adaptive Cruise Control (ACC) Comprehensive evaluation of emerging technologies of advanced driver assistance systems: An overview [Volume 6, Issue 1, 2022, Pages 41-51]
  • Adaptive Reuse Guidelines for structural optimization and sustainable retrofitting of re-purposed buildings using BIM [Volume 5, Issue 2, 2021, Pages 70-76]
  • Advanced Driver Assistance Systems (ADAS) Comprehensive evaluation of emerging technologies of advanced driver assistance systems: An overview [Volume 6, Issue 1, 2022, Pages 41-51]
  • Advanced Emergency Braking (AEB) Comprehensive evaluation of emerging technologies of advanced driver assistance systems: An overview [Volume 6, Issue 1, 2022, Pages 41-51]
  • Aeroacoustics Study the Performance of Turbofan Engines under the Effect of Changing Chevron Nozzle Geometry [(Articles in Press)]
  • AI Factors influencing control of the epidemic in Egypt : Case of mapping vulnerability index for the spread of COVID-19 [Volume 4, Issue 2, 2020, Pages 190-204]
  • Alloys Reactive structure materials [Volume 4, Issue 2, 2020, Pages 171-177]
  • All-terrain vehicle Design, synthesis, and manufacturing of a competitive, lightweight, space-frame, open wheeled, single seated all-terrain vehicle (ATV) [Volume 4, Issue 2, 2020, Pages 178-189]
  • Aluminum chips Statistical analysis of solid-state recycled aluminum alloy 2011 chips by hot extrusion [Volume 6, Issue 2, 2022, Pages 86-94]
  • Aluminum Foam Effect of blast wave on lightweight structure performance [Volume 1, Issue 1, 2017, Pages 1-6]
  • Amorphous/ microcrystalline thin-film silicon solar cells Manufacturing of a-Si/μc-Si thin-film solar cell using PECVD and silver coating [Volume 2, Issue 2, 2018, Pages 49-58]
  • A multi-layer classification technique A multi-layer Classification Technique for High Resolution Satellite Images Using Radiometric Calibration Modelling [Volume 2, Issue 1, 2018, Pages 36-43]
  • Analog circuit design Design of low quiescent current LDO voltage regulator for portable electronic devices [Volume 3, Issue 2, 2019, Pages 91-107]
  • Angle of arrival Spatial Signature Modulation: A Novel Secure Modulation Approach for MIMO Wiretap Channel [Volume 1, Issue 2, 2017, Pages 96-107]
  • Anomalous reflection A review for antenna performance enhancement using metasurface structures [Volume 5, Issue 1, 2021]
  • ANSYS CFX Micro TJE centrifugal compressor performance prediction Tamer S. [Volume 2, Issue 4, 2018, Pages 185-203]
  • Anthropomorphic test device Developing a custom Anthropomorphic Test Device for measuring blast effects on occupants inside armored vehicles [Volume 3, Issue 2, 2019, Pages 70-76]
  • Anti-ank missile Advanced top-attack trajectory guidance law with impact angle [Volume 5, Issue 1, 2021]
  • Anti-dive Design, synthesis, and manufacturing of a competitive, lightweight, space-frame, open wheeled, single seated all-terrain vehicle (ATV) [Volume 4, Issue 2, 2020, Pages 178-189]
  • Anti-squat Design, synthesis, and manufacturing of a competitive, lightweight, space-frame, open wheeled, single seated all-terrain vehicle (ATV) [Volume 4, Issue 2, 2020, Pages 178-189]
  • Aperture filter Blur removal in QR code images using directional aperture filter [Volume 4, Issue 1, 2020, Pages 142-151]
  • Applications and design features The influence of Hassan Fathy architecture on modern housing trends within the city pattern [Volume 6, Issue 1, 2022, Pages 22-40]
  • Architectural design phases An empirical study to evaluate the architectural design in the construction documents stage using a criteria-based evaluation model [Volume 4, Issue 2, 2020, Pages 205-216]
  • Architectural design studio Teaching energy simulation in the architectural design studio: An experimental approach [Volume 2, Issue 2, 2018, Pages 59-64]
  • Architectural Engineering and Construction Facility Management Sector (AEC FM) MAPPING MANUFACTURING DATA INTO THE LIFE CYCLE OF BUILDING INFORMATION MODELING PROJECTS DIGITALLY [(Articles in Press)]
  • Architectural fundamentals Architectural and structural fundamentals for the high-risk buildings : Smart architectural model for safe security surveillance point in Sinai [Volume 5, Issue 1, 2021]
  • Assess strategyes SI model of measuring the success of strategies and decisions in construction projects using system dynamics [Volume 3, Issue 1, 2019, Pages 42-51]
  • Autonomous robotics Multi-UAV Tactic Switching via Model Predictive Control and Fuzzy Q-Learning [Volume 1, Issue 2, 2017, Pages 44-57]
  • Axial flow turbine Studying the effects of using nano-materials treated glass openings : A scale model case study [Volume 2, Issue 2, 2018, Pages 65-71]
  • Axial flow turbine Automated axial flow turbine design with performance prediction [Volume 2, Issue 2, 2018, Pages 72-81]
  • Axial flow turbine design Studying the effects of using nano-materials treated glass openings : A scale model case study [Volume 2, Issue 2, 2018, Pages 65-71]
  • Axial flow turbine design Automated axial flow turbine design with performance prediction [Volume 2, Issue 2, 2018, Pages 72-81]

B

  • Band pass filter Analysis of a compact size second order composite right/left handed coupled resonator band pass filter for wireless applications [Volume 1, Issue 1, 2017, Pages 7-11]
  • Barker Code A novel sidelobe cancellation method for Barker code pulse compression [Volume 2, Issue 4, 2018, Pages 177-184]
  • Bi-directional long shortterm memory (BILSTM) Integrated bidirectional LSTM–CNN model for customers reviews classification [Volume 5, Issue 1, 2021]
  • BIM A comparative life cycle analysis of glass windows : Assiut University Hospital Clinic as a case study [Volume 8, Issue 1, 2024, Pages 31-46]
  • Biomimicry Stimuli of 4D technology and its impact on architectural design in the age of artificial intelligence [(Articles in Press)]
  • Blade element theory Modeling and Systematic Investigation of a Small-Scale Propeller Selection [Volume 7, Issue 1, 2023, Pages 15-21]
  • Blockchain Factors influencing control of the epidemic in Egypt : Case of mapping vulnerability index for the spread of COVID-19 [Volume 4, Issue 2, 2020, Pages 190-204]
  • BOD5 Application of flying jet plasma torch in wastewater treatment [Volume 2, Issue 3, 2018, Pages 101-108]
  • Bridge deck Composite bridge deck configured and designed using tailor processing technique. [(Articles in Press)]
  • Burning rate Burning rate measurement of composite propellant using acoustic wave emission in comparison with other techniques [Volume 4, Issue 2, 2020, Pages 226-232]

C

  • CAM Integrating CAM and numerical simulation to investigate single point incremental forming of Al6061 [Volume 4, Issue 1, 2020, Pages 109-120]
  • Centrifugal compressor characteristic Micro TJE centrifugal compressor performance prediction Tamer S. [Volume 2, Issue 4, 2018, Pages 185-203]
  • Chaotic generator Discrete time-based chua chaotic generator [Volume 3, Issue 1, 2019, Pages 31-36]
  • Chevron Nozzle Study the Performance of Turbofan Engines under the Effect of Changing Chevron Nozzle Geometry [(Articles in Press)]
  • Chirp Scaling Algorithm (CSA) Spaceborne synthetic aperture radar (SAR) motion compensation using autofocus [Volume 8, Issue 1, 2024, Pages 61-68]
  • Civilian GPS receivers Efficient jamming signal against civilian GPS receivers [Volume 3, Issue 2, 2019, Pages 53-60]
  • Classical proportional-integral (PI) controller Comparative Study Among Different Control Techniques For Stabilized Platform [Volume 2, Issue 1, 2018, Pages 44-48]
  • Climate Change Thermal Behaviour Assessment For The Different Building Envelope Parts In Egypt Under Climate Change Scenarios [Volume 1, Issue 2, 2017, Pages 72-85]
  • Clinical engineering A Comprehensive Review of Hospital Strategic Planning Optimization through Clinical Engineering Expertise [(Articles in Press)]
  • CNC Integrating CAM and numerical simulation to investigate single point incremental forming of Al6061 [Volume 4, Issue 1, 2020, Pages 109-120]
  • CO2 emissions Towards more sustainable residential buildings in New Cairo, Egypt: A case study assessment using energy efficiency simulations. [Volume 7, Issue 1, 2023, Pages 22-53]
  • College corridors Revitalizing college building corridors with skylights Reham Eldessuky Hamed [Volume 6, Issue 1, 2022, Pages 52-58]
  • Composite Propellant Burning rate measurement of composite propellant using acoustic wave emission in comparison with other techniques [Volume 4, Issue 2, 2020, Pages 226-232]
  • Composite structure Effect of blast wave on lightweight structure performance [Volume 1, Issue 1, 2017, Pages 1-6]
  • Composite structure Blast hazard impact on V-shape composite panel performance [Volume 2, Issue 2, 2018, Pages 90-99]
  • Connecting Rod Parametric study of stresses affecting the external and internal fibers of connecting rod small end [Volume 5, Issue 2, 2021, Pages 51-62]
  • Convection heat transfer Two-time level finite-difference method for solving the downstream diffusion for flow between Parallel plates [Volume 8, Issue 1, 2024, Pages 20-30]
  • Convolutional neural network (CNN) Integrated bidirectional LSTM–CNN model for customers reviews classification [Volume 5, Issue 1, 2021]
  • Convolutional Neutral Networks (CNN) Comprehensive evaluation of emerging technologies of advanced driver assistance systems: An overview [Volume 6, Issue 1, 2022, Pages 41-51]
  • Cooperative Adaptive Cruise Control (CACC) Comprehensive evaluation of emerging technologies of advanced driver assistance systems: An overview [Volume 6, Issue 1, 2022, Pages 41-51]
  • Cooperative robotics Multi-UAV Tactic Switching via Model Predictive Control and Fuzzy Q-Learning [Volume 1, Issue 2, 2017, Pages 44-57]
  • Corner detector Advanced selective key point detection techniques [Volume 3, Issue 2, 2019, Pages 61-69]
  • Couplers A review on novel magnetic properties of metamaterials CRLH devices : Part 1 [Volume 2, Issue 4, 2018, Pages 153-160]
  • Couplers On the review of magnetic properties of metamaterials CRLH microwave couplers: Design and analysis [Volume 7, Issue 2, 2023, Pages 61-97]
  • COVID-19 Factors influencing control of the epidemic in Egypt : Case of mapping vulnerability index for the spread of COVID-19 [Volume 4, Issue 2, 2020, Pages 190-204]
  • CRB Direction Finding of Correlated Sources in Extremely Low SNR Environment [(Articles in Press)]
  • Criteria-based evaluation An empirical study to evaluate the architectural design in the construction documents stage using a criteria-based evaluation model [Volume 4, Issue 2, 2020, Pages 205-216]
  • CRLH On the review of magnetic metamaterials CRLH impedance transformers: Design and analysis [Volume 6, Issue 1, 2022, Pages 1-21]
  • CRLH TL A review on novel magnetic properties of metamaterials CRLH devices : Part 1 [Volume 2, Issue 4, 2018, Pages 153-160]
  • CRLH-TL Analysis of a compact size second order composite right/left handed coupled resonator band pass filter for wireless applications [Volume 1, Issue 1, 2017, Pages 7-11]
  • CRLH transmission Lines On the review of magnetic properties of metamaterials CRLH microwave couplers: Design and analysis [Volume 7, Issue 2, 2023, Pages 61-97]

D

  • Database MAPPING MANUFACTURING DATA INTO THE LIFE CYCLE OF BUILDING INFORMATION MODELING PROJECTS DIGITALLY [(Articles in Press)]
  • Dead-zone compensator Position control of a pneumatic cylinder actuator using modified PWM algorithm [Volume 4, Issue 1, 2020, Pages 121-126]
  • Deep learning Integrated bidirectional LSTM–CNN model for customers reviews classification [Volume 5, Issue 1, 2021]
  • Delay's recovery Optimal construction scheduling: A trade-off approach between project time, cost, and residual flexibility [Volume 7, Issue 2, 2023, Pages 125-134]
  • Design decision making An empirical study to evaluate the architectural design in the construction documents stage using a criteria-based evaluation model [Volume 4, Issue 2, 2020, Pages 205-216]
  • Design of experiments Statistical analysis of solid-state recycled aluminum alloy 2011 chips by hot extrusion [Volume 6, Issue 2, 2022, Pages 86-94]
  • Diffusion bonding Microjoining developments of ASS316L/AZ31 TLP bonds using Cu and Ni high temperature solid state diffusion [Volume 3, Issue 1, 2019, Pages 37-41]
  • Digital workflow MAPPING MANUFACTURING DATA INTO THE LIFE CYCLE OF BUILDING INFORMATION MODELING PROJECTS DIGITALLY [(Articles in Press)]
  • Direct yaw moment Non-linear skid steering system for 4×4 UGV using fuzzy logic direct yaw moment control [Volume 1, Issue 1, 2017, Pages 22-32]
  • Displacement controlled linear actuator Model Identification of Displacement Controlled Linear Actuator in Hydraulic System [Volume 2, Issue 1, 2018, Pages 31-35]
  • Downstream diffusion Two-time level finite-difference method for solving the downstream diffusion for flow between Parallel plates [Volume 8, Issue 1, 2024, Pages 20-30]
  • Drop weight impact test Fabrication and characterization of epoxy modified with 0.5% MWCNTs [Volume 2, Issue 3, 2018, Pages 134-146]
  • Dynamic Encirclement tactic Multi-UAV Tactic Switching via Model Predictive Control and Fuzzy Q-Learning [Volume 1, Issue 2, 2017, Pages 44-57]

E

  • ECC UWB MIMO antenna with hybrid pattern and polarization diversity [Volume 5, Issue 2, 2021, Pages 77-90]
  • Egypt Electrification of Egyptian army camps in remote areas using renewable energies: An Application of HOMER in New Valley [Volume 7, Issue 2, 2023, Pages 98-112]
  • Electromechanical impedance An integrated algorithm for structural health monitoring of composite plate using electromechanical impedance [Volume 4, Issue 1, 2020, Pages 127-141]
  • Embedded system Design and implementation of embedded servo control system for a high maneuvering Ariel vehicle [Volume 6, Issue 2, 2022, Pages 95-105]
  • Energetic materials Energetic Materials Research at Ludwig Maximilian University of Munich (LMU) [Volume 2, Issue 1, 2018, Pages 1-9]
  • Energy Conservation Wireless LED street lighting system design [Volume 1, Issue 1, 2017, Pages 33-37]
  • Energy efficiency Towards more sustainable residential buildings in New Cairo, Egypt: A case study assessment using energy efficiency simulations. [Volume 7, Issue 1, 2023, Pages 22-53]
  • Energy performance Thermal Behaviour Assessment For The Different Building Envelope Parts In Egypt Under Climate Change Scenarios [Volume 1, Issue 2, 2017, Pages 72-85]
  • Energy performance Teaching energy simulation in the architectural design studio: An experimental approach [Volume 2, Issue 2, 2018, Pages 59-64]
  • Energy performance Revitalizing college building corridors with skylights Reham Eldessuky Hamed [Volume 6, Issue 1, 2022, Pages 52-58]
  • Enhancement Enhanced Ti I spectral intensity using NELIBS technique [Volume 3, Issue 2, 2019, Pages 84-90]
  • Envelope design Towards the Development of Energy Efficient Compact House: The Solar Decathlon SLIDE-S Prototype – Wall System design [Volume 2, Issue 1, 2018, Pages 24-30]
  • Evaluation Evaluation of heritage building rehabilitation in Egypt (The case study on Wakala Al-Ghouri) [Volume 7, Issue 1, 2023, Pages 1-14]
  • Evaluation of anti-knock performance Using finite element modeling to design and to evaluate antiknock performance of a safety pod working in low depth tunnels [Volume 4, Issue 2, 2020, Pages 217-225]
  • Explosives Energetic Materials Research at Ludwig Maximilian University of Munich (LMU) [Volume 2, Issue 1, 2018, Pages 1-9]

F

  • Fast Fourier transform Real time design and implementation of MTD-SWVD using FPGA [Volume 2, Issue 3, 2018, Pages 117-128]
  • FEA Finite Element Analysis of a Single Point Incremental Forming of Foot Supports [(Articles in Press)]
  • Femtocell Enhanced handover algorithm in LTE femtocells network [Volume 2, Issue 4, 2018, Pages 161-171]
  • Fenestration Thermal Behaviour Assessment For The Different Building Envelope Parts In Egypt Under Climate Change Scenarios [Volume 1, Issue 2, 2017, Pages 72-85]
  • Ferrite A review on novel magnetic properties of metamaterials CRLH devices : Part 1 [Volume 2, Issue 4, 2018, Pages 153-160]
  • Ferrite On the review of magnetic properties of metamaterials CRLH microwave couplers: Design and analysis [Volume 7, Issue 2, 2023, Pages 61-97]
  • Field Programmable Gate Array (FPGA) Real time design and implementation of MTD-SWVD using FPGA [Volume 2, Issue 3, 2018, Pages 117-128]
  • Finite Element Analysis Blast hazard impact on V-shape composite panel performance [Volume 2, Issue 2, 2018, Pages 90-99]
  • Finite Element Modeling An integrated algorithm for structural health monitoring of composite plate using electromechanical impedance [Volume 4, Issue 1, 2020, Pages 127-141]
  • Flow Noise Study the Performance of Turbofan Engines under the Effect of Changing Chevron Nozzle Geometry [(Articles in Press)]
  • Foot supports Finite Element Analysis of a Single Point Incremental Forming of Foot Supports [(Articles in Press)]
  • Formability Finite Element Analysis of a Single Point Incremental Forming of Foot Supports [(Articles in Press)]
  • Formation tactic Multi-UAV Tactic Switching via Model Predictive Control and Fuzzy Q-Learning [Volume 1, Issue 2, 2017, Pages 44-57]
  • FTIR Synthesis, characterization and qualification of graphene for electronic applications [Volume 8, Issue 1, 2024, Pages 47-60]
  • Fuzzy logic control Non-linear skid steering system for 4×4 UGV using fuzzy logic direct yaw moment control [Volume 1, Issue 1, 2017, Pages 22-32]

G

  • Geometric correction Assessment of geometric correction of remote sensing satellite images using RPC versus GCP [Volume 2, Issue 2, 2018, Pages 82-89]
  • Glass windows A comparative life cycle analysis of glass windows : Assiut University Hospital Clinic as a case study [Volume 8, Issue 1, 2024, Pages 31-46]
  • Gold sequence Statistical analysis and performance comparison of improved and optimized CSC using different chaotic maps under different fading channels [Volume 2, Issue 4, 2018, Pages 204-213]
  • GPS receiver tracking loop Efficient jamming signal against civilian GPS receivers [Volume 3, Issue 2, 2019, Pages 53-60]
  • Graphene Synthesis, characterization and qualification of graphene for electronic applications [Volume 8, Issue 1, 2024, Pages 47-60]

H

  • Harris reflector Advanced selective key point detection techniques [Volume 3, Issue 2, 2019, Pages 61-69]
  • Hassan Fathy's architecture The influence of Hassan Fathy architecture on modern housing trends within the city pattern [Volume 6, Issue 1, 2022, Pages 22-40]
  • Heat treatment Study the influence of destabilization and tempering heat treatments on the microstructure of high chromium white cast iron by observing the resulted hardness and Abrasive wear conduct [Volume 6, Issue 2, 2022, Pages 73-85]
  • Heavy mechanical equipment component Using finite element modeling to design and to evaluate antiknock performance of a safety pod working in low depth tunnels [Volume 4, Issue 2, 2020, Pages 217-225]
  • High-Risk Buildings Architectural and structural fundamentals for the high-risk buildings : Smart architectural model for safe security surveillance point in Sinai [Volume 5, Issue 1, 2021]
  • Holistic view Identification and analysis of project-based organization’s workload fluctuation factors [Volume 7, Issue 2, 2023, Pages 113-124]
  • HOMER Electrification of Egyptian army camps in remote areas using renewable energies: An Application of HOMER in New Valley [Volume 7, Issue 2, 2023, Pages 98-112]
  • Hospital planning and designing A Comprehensive Review of Hospital Strategic Planning Optimization through Clinical Engineering Expertise [(Articles in Press)]
  • Hospital planning is a role of clinical engineering A Comprehensive Review of Hospital Strategic Planning Optimization through Clinical Engineering Expertise [(Articles in Press)]
  • Hydraulic system Model Identification of Displacement Controlled Linear Actuator in Hydraulic System [Volume 2, Issue 1, 2018, Pages 31-35]

I

  • Image Quality Spaceborne synthetic aperture radar (SAR) motion compensation using autofocus [Volume 8, Issue 1, 2024, Pages 61-68]
  • Image registration Advanced selective key point detection techniques [Volume 3, Issue 2, 2019, Pages 61-69]
  • Impact Angle Constrains Advanced top-attack trajectory guidance law with impact angle [Volume 5, Issue 1, 2021]
  • Improved Hummer Synthesis, characterization and qualification of graphene for electronic applications [Volume 8, Issue 1, 2024, Pages 47-60]
  • Incremental sheet forming Finite Element Analysis of a Single Point Incremental Forming of Foot Supports [(Articles in Press)]
  • Indoors Environment Revitalizing college building corridors with skylights Reham Eldessuky Hamed [Volume 6, Issue 1, 2022, Pages 52-58]
  • Inrush current Design and implementation of embedded servo control system for a high maneuvering Ariel vehicle [Volume 6, Issue 2, 2022, Pages 95-105]
  • Inverted Ackerman Design, synthesis, and manufacturing of a competitive, lightweight, space-frame, open wheeled, single seated all-terrain vehicle (ATV) [Volume 4, Issue 2, 2020, Pages 178-189]
  • IRIG-106 A two-stage rice-based lossless compression method for telemetry data [Volume 2, Issue 3, 2018, Pages 147-152]

K

L

  • Laser assisted machining (LAM) Investigation of the parameters influencing pulsed laser assisted turning of DIN. 1.2379 tool steel [Volume 4, Issue 1, 2020, Pages 162-170]
  • Laser assisted turning Investigation of the parameters influencing pulsed laser assisted turning of DIN. 1.2379 tool steel [Volume 4, Issue 1, 2020, Pages 162-170]
  • Laser realization Design and realization of a compact and multi-purpose passively Q-switched ND:YAG laser system [Volume 2, Issue 3, 2018, Pages 129-133]
  • Launch pad location Effect of design parameters on a two-stage launch vehicle performance [Volume 2, Issue 3, 2018, Pages 109-116]
  • LDO voltage regulator Design of low quiescent current LDO voltage regulator for portable electronic devices [Volume 3, Issue 2, 2019, Pages 91-107]
  • LED street lighting Wireless LED street lighting system design [Volume 1, Issue 1, 2017, Pages 33-37]
  • Life Cycle Assessment A comparative life cycle analysis of glass windows : Assiut University Hospital Clinic as a case study [Volume 8, Issue 1, 2024, Pages 31-46]
  • Life Cycle Impact Assessment A comparative life cycle analysis of glass windows : Assiut University Hospital Clinic as a case study [Volume 8, Issue 1, 2024, Pages 31-46]
  • Life Cycle Inventory A comparative life cycle analysis of glass windows : Assiut University Hospital Clinic as a case study [Volume 8, Issue 1, 2024, Pages 31-46]
  • Linear Quadratic Regulator (LQR) controller Comparative Study Among Different Control Techniques For Stabilized Platform [Volume 2, Issue 1, 2018, Pages 44-48]
  • Lossless compression A two-stage rice-based lossless compression method for telemetry data [Volume 2, Issue 3, 2018, Pages 147-152]
  • Low noise Design of a low noise single-ended sensor interface amplifier for bio-potential applications [Volume 8, Issue 1, 2024, Pages 69-79]

M

  • Manufacturing Data MAPPING MANUFACTURING DATA INTO THE LIFE CYCLE OF BUILDING INFORMATION MODELING PROJECTS DIGITALLY [(Articles in Press)]
  • Markov chain Enhanced handover algorithm in LTE femtocells network [Volume 2, Issue 4, 2018, Pages 161-171]
  • MATLAB Micro TJE centrifugal compressor performance prediction Tamer S. [Volume 2, Issue 4, 2018, Pages 185-203]
  • Maximum likelihood (ML) A multi-layer Classification Technique for High Resolution Satellite Images Using Radiometric Calibration Modelling [Volume 2, Issue 1, 2018, Pages 36-43]
  • Mechanical transmission Monitoring of automotive multistage mechanical transmissions using multi - class support vector machine [Volume 1, Issue 1, 2017, Pages 38-43]
  • Metasurface A review for antenna performance enhancement using metasurface structures [Volume 5, Issue 1, 2021]
  • Microstructure Microjoining developments of ASS316L/AZ31 TLP bonds using Cu and Ni high temperature solid state diffusion [Volume 3, Issue 1, 2019, Pages 37-41]
  • Micro turbojet Micro TJE centrifugal compressor performance prediction Tamer S. [Volume 2, Issue 4, 2018, Pages 185-203]
  • Microwave Components On the review of magnetic properties of metamaterials CRLH microwave couplers: Design and analysis [Volume 7, Issue 2, 2023, Pages 61-97]
  • Microwave Impedance Transformer On the review of magnetic metamaterials CRLH impedance transformers: Design and analysis [Volume 6, Issue 1, 2022, Pages 1-21]
  • MIMO UWB MIMO antenna with hybrid pattern and polarization diversity [Volume 5, Issue 2, 2021, Pages 77-90]
  • MIMO security Spatial Signature Modulation: A Novel Secure Modulation Approach for MIMO Wiretap Channel [Volume 1, Issue 2, 2017, Pages 96-107]
  • Mining safety equipment Using finite element modeling to design and to evaluate antiknock performance of a safety pod working in low depth tunnels [Volume 4, Issue 2, 2020, Pages 217-225]
  • Modelling Model Identification of Displacement Controlled Linear Actuator in Hydraulic System [Volume 2, Issue 1, 2018, Pages 31-35]
  • Model predictive control (MPC) A Review on Motion Control of Unmanned Ground and Aerial Vehicles Based on Model Predictive Control Techniques [Volume 2, Issue 1, 2018, Pages 10-23]
  • Multi-disciplinary optimization Guidelines for structural optimization and sustainable retrofitting of re-purposed buildings using BIM [Volume 5, Issue 2, 2021, Pages 70-76]
  • Multi-Walled Carbon Nanotubes Fabrication and characterization of epoxy modified with 0.5% MWCNTs [Volume 2, Issue 3, 2018, Pages 134-146]

N

  • Nanoparticles Enhanced Ti I spectral intensity using NELIBS technique [Volume 3, Issue 2, 2019, Pages 84-90]
  • Nd-YAG laser Investigation of the parameters influencing pulsed laser assisted turning of DIN. 1.2379 tool steel [Volume 4, Issue 1, 2020, Pages 162-170]
  • Nd:YAG laser Design and realization of a compact and multi-purpose passively Q-switched ND:YAG laser system [Volume 2, Issue 3, 2018, Pages 129-133]
  • NELIBS Enhanced Ti I spectral intensity using NELIBS technique [Volume 3, Issue 2, 2019, Pages 84-90]
  • New Valley Electrification of Egyptian army camps in remote areas using renewable energies: An Application of HOMER in New Valley [Volume 7, Issue 2, 2023, Pages 98-112]
  • Nusselt number Two-time level finite-difference method for solving the downstream diffusion for flow between Parallel plates [Volume 8, Issue 1, 2024, Pages 20-30]

O

  • Opaque Thermal Behaviour Assessment For The Different Building Envelope Parts In Egypt Under Climate Change Scenarios [Volume 1, Issue 2, 2017, Pages 72-85]
  • Optimization Guidelines for structural optimization and sustainable retrofitting of re-purposed buildings using BIM [Volume 5, Issue 2, 2021, Pages 70-76]
  • Oversampling Direction Finding of Correlated Sources in Extremely Low SNR Environment [(Articles in Press)]

P

  • Painting Effect of changing painting parameters on surface gloss and roughness [Volume 3, Issue 2, 2019, Pages 77-83]
  • Passive Skylights Revitalizing college building corridors with skylights Reham Eldessuky Hamed [Volume 6, Issue 1, 2022, Pages 52-58]
  • Pattern Diversity UWB MIMO antenna with hybrid pattern and polarization diversity [Volume 5, Issue 2, 2021, Pages 77-90]
  • PECVD Manufacturing of a-Si/μc-Si thin-film solar cell using PECVD and silver coating [Volume 2, Issue 2, 2018, Pages 49-58]
  • Personal safety systems (PSS) Using finite element modeling to design and to evaluate antiknock performance of a safety pod working in low depth tunnels [Volume 4, Issue 2, 2020, Pages 217-225]
  • Phase Gradient Autofocus (PGA) Spaceborne synthetic aperture radar (SAR) motion compensation using autofocus [Volume 8, Issue 1, 2024, Pages 61-68]
  • Photonics A review on metasurface applications (Optical waveguides and Surface enhanced Raman) on optics-Surface plasmon view [Volume 6, Issue 2, 2022, Pages 59-72]
  • Planning and control Identification and analysis of project-based organization’s workload fluctuation factors [Volume 7, Issue 2, 2023, Pages 113-124]
  • Plasmonics A review on metasurface applications (Optical waveguides and Surface enhanced Raman) on optics-Surface plasmon view [Volume 6, Issue 2, 2022, Pages 59-72]
  • Plunging An Experimental Assessment of Unsteady Forces on a Plunging Airfoil Oscillating in Stationary Fluid at High Frequencies [Volume 1, Issue 2, 2017, Pages 58-71]
  • Polarization diversity UWB MIMO antenna with hybrid pattern and polarization diversity [Volume 5, Issue 2, 2021, Pages 77-90]
  • Polynomial transformation Assessment of geometric correction of remote sensing satellite images using RPC versus GCP [Volume 2, Issue 2, 2018, Pages 82-89]
  • Position Control Design and implementation of embedded servo control system for a high maneuvering Ariel vehicle [Volume 6, Issue 2, 2022, Pages 95-105]
  • Pulse Compression A novel sidelobe cancellation method for Barker code pulse compression [Volume 2, Issue 4, 2018, Pages 177-184]
  • PV Sizing of a Photovoltaic System for a House in Qassim, Saudi Arabia [Volume 1, Issue 2, 2017, Pages 86-90]
  • PV Manufacturing of a-Si/μc-Si thin-film solar cell using PECVD and silver coating [Volume 2, Issue 2, 2018, Pages 49-58]

Q

  • QR code image Blur removal in QR code images using directional aperture filter [Volume 4, Issue 1, 2020, Pages 142-151]

R

  • Raman Synthesis, characterization and qualification of graphene for electronic applications [Volume 8, Issue 1, 2024, Pages 47-60]
  • RCS reduction A review for antenna performance enhancement using metasurface structures [Volume 5, Issue 1, 2021]
  • Reduced frequency An Experimental Assessment of Unsteady Forces on a Plunging Airfoil Oscillating in Stationary Fluid at High Frequencies [Volume 1, Issue 2, 2017, Pages 58-71]
  • Reduced Graphene oxide Synthesis, characterization and qualification of graphene for electronic applications [Volume 8, Issue 1, 2024, Pages 47-60]
  • Reflectance A multi-layer Classification Technique for High Resolution Satellite Images Using Radiometric Calibration Modelling [Volume 2, Issue 1, 2018, Pages 36-43]
  • Rehabilitation Evaluation of heritage building rehabilitation in Egypt (The case study on Wakala Al-Ghouri) [Volume 7, Issue 1, 2023, Pages 1-14]
  • Repetitive Construction Projects Scheduling the Work of Multiple Construction Crews Working Concurrently in Repetitive Construction Projects [Volume 7, Issue 1, 2023, Pages 54-60]
  • Resources Utilization Scheduling the Work of Multiple Construction Crews Working Concurrently in Repetitive Construction Projects [Volume 7, Issue 1, 2023, Pages 54-60]
  • Retrofitting Analytical Hierarchical Process (AHP) as a decision-making model for retrofitting ordinary buildings into smart buildings [Volume 5, Issue 2, 2021, Pages 63-69]
  • RMSE Direction Finding of Correlated Sources in Extremely Low SNR Environment [(Articles in Press)]
  • Rough surface Effect of changing painting parameters on surface gloss and roughness [Volume 3, Issue 2, 2019, Pages 77-83]
  • RSRP Enhanced handover algorithm in LTE femtocells network [Volume 2, Issue 4, 2018, Pages 161-171]
  • RSRQ Enhanced handover algorithm in LTE femtocells network [Volume 2, Issue 4, 2018, Pages 161-171]

S

  • Safe Security Point Architectural and structural fundamentals for the high-risk buildings : Smart architectural model for safe security surveillance point in Sinai [Volume 5, Issue 1, 2021]
  • Scheduling Scheduling the Work of Multiple Construction Crews Working Concurrently in Repetitive Construction Projects [Volume 7, Issue 1, 2023, Pages 54-60]
  • SEM Synthesis, characterization and qualification of graphene for electronic applications [Volume 8, Issue 1, 2024, Pages 47-60]
  • Sentinel-1 Spaceborne synthetic aperture radar (SAR) motion compensation using autofocus [Volume 8, Issue 1, 2024, Pages 61-68]
  • Sidelobe cancellation A novel sidelobe cancellation method for Barker code pulse compression [Volume 2, Issue 4, 2018, Pages 177-184]
  • SLAM Experimental investigation and performance enhancement of swing check valves [Volume 8, Issue 1, 2024, Pages 1-19]
  • SLM Characterization of 3D Printed Stainless Steel SS316L Powders Joined by TIG-, Plasma- and Laser Welding [Volume 1, Issue 2, 2017, Pages 91-95]
  • Smart Architectural Model Architectural and structural fundamentals for the high-risk buildings : Smart architectural model for safe security surveillance point in Sinai [Volume 5, Issue 1, 2021]
  • Smart buildings Analytical Hierarchical Process (AHP) as a decision-making model for retrofitting ordinary buildings into smart buildings [Volume 5, Issue 2, 2021, Pages 63-69]
  • Solid-state recycling Statistical analysis of solid-state recycled aluminum alloy 2011 chips by hot extrusion [Volume 6, Issue 2, 2022, Pages 86-94]
  • Space frame Design, synthesis, and manufacturing of a competitive, lightweight, space-frame, open wheeled, single seated all-terrain vehicle (ATV) [Volume 4, Issue 2, 2020, Pages 178-189]
  • SPIF Integrating CAM and numerical simulation to investigate single point incremental forming of Al6061 [Volume 4, Issue 1, 2020, Pages 109-120]
  • Spread Spectrum Statistical analysis and performance comparison of improved and optimized CSC using different chaotic maps under different fading channels [Volume 2, Issue 4, 2018, Pages 204-213]
  • SPSS Factors influencing control of the epidemic in Egypt : Case of mapping vulnerability index for the spread of COVID-19 [Volume 4, Issue 2, 2020, Pages 190-204]
  • SS316L Characterization of 3D Printed Stainless Steel SS316L Powders Joined by TIG-, Plasma- and Laser Welding [Volume 1, Issue 2, 2017, Pages 91-95]
  • Stabilization Adaptive back-stepping control applied on octocopter under recoil disturbance [Volume 1, Issue 1, 2017, Pages 12-21]
  • Structural fundamentals Architectural and structural fundamentals for the high-risk buildings : Smart architectural model for safe security surveillance point in Sinai [Volume 5, Issue 1, 2021]
  • Support Vector Machine Monitoring of automotive multistage mechanical transmissions using multi - class support vector machine [Volume 1, Issue 1, 2017, Pages 38-43]
  • Surface plasmon polariton (SPP) A review on metasurface applications (Optical waveguides and Surface enhanced Raman) on optics-Surface plasmon view [Volume 6, Issue 2, 2022, Pages 59-72]
  • Survival capsule Using finite element modeling to design and to evaluate antiknock performance of a safety pod working in low depth tunnels [Volume 4, Issue 2, 2020, Pages 217-225]
  • Sustainability Analytical Hierarchical Process (AHP) as a decision-making model for retrofitting ordinary buildings into smart buildings [Volume 5, Issue 2, 2021, Pages 63-69]
  • Sustainability Guidelines for structural optimization and sustainable retrofitting of re-purposed buildings using BIM [Volume 5, Issue 2, 2021, Pages 70-76]
  • Sustainability Towards more sustainable residential buildings in New Cairo, Egypt: A case study assessment using energy efficiency simulations. [Volume 7, Issue 1, 2023, Pages 22-53]
  • Synthetic aperture radar (SAR) Spaceborne synthetic aperture radar (SAR) motion compensation using autofocus [Volume 8, Issue 1, 2024, Pages 61-68]

T

  • TCT Optimal construction scheduling: A trade-off approach between project time, cost, and residual flexibility [Volume 7, Issue 2, 2023, Pages 125-134]
  • Teaching Methods Teaching energy simulation in the architectural design studio: An experimental approach [Volume 2, Issue 2, 2018, Pages 59-64]
  • Tensile Fabrication and characterization of epoxy modified with 0.5% MWCNTs [Volume 2, Issue 3, 2018, Pages 134-146]
  • TLP Microjoining developments of ASS316L/AZ31 TLP bonds using Cu and Ni high temperature solid state diffusion [Volume 3, Issue 1, 2019, Pages 37-41]
  • TNT explosive charge Blast hazard impact on V-shape composite panel performance [Volume 2, Issue 2, 2018, Pages 90-99]
  • Transfer function Model Identification of Displacement Controlled Linear Actuator in Hydraulic System [Volume 2, Issue 1, 2018, Pages 31-35]
  • Tunable Components On the review of magnetic metamaterials CRLH impedance transformers: Design and analysis [Volume 6, Issue 1, 2022, Pages 1-21]
  • Turbulent Mixing Noise Study the Performance of Turbofan Engines under the Effect of Changing Chevron Nozzle Geometry [(Articles in Press)]

U

  • Ultrasonic dispersion Fabrication and characterization of epoxy modified with 0.5% MWCNTs [Volume 2, Issue 3, 2018, Pages 134-146]
  • Users Comfort Revitalizing college building corridors with skylights Reham Eldessuky Hamed [Volume 6, Issue 1, 2022, Pages 52-58]
  • USRP Direction Finding of Correlated Sources in Extremely Low SNR Environment [(Articles in Press)]
  • UWB UWB MIMO antenna with hybrid pattern and polarization diversity [Volume 5, Issue 2, 2021, Pages 77-90]

V

  • Vernacular Architecture The influence of Hassan Fathy architecture on modern housing trends within the city pattern [Volume 6, Issue 1, 2022, Pages 22-40]
  • Vibration analysis Monitoring of automotive multistage mechanical transmissions using multi - class support vector machine [Volume 1, Issue 1, 2017, Pages 38-43]

W

  • Wastewater Application of flying jet plasma torch in wastewater treatment [Volume 2, Issue 3, 2018, Pages 101-108]
  • Wigner Ville distribution (WVD) Real time design and implementation of MTD-SWVD using FPGA [Volume 2, Issue 3, 2018, Pages 117-128]
  • Wireless Sensor Network Wireless LED street lighting system design [Volume 1, Issue 1, 2017, Pages 33-37]
  • Working drawings curriculum An empirical study to evaluate the architectural design in the construction documents stage using a criteria-based evaluation model [Volume 4, Issue 2, 2020, Pages 205-216]
  • Working drawings evaluation An empirical study to evaluate the architectural design in the construction documents stage using a criteria-based evaluation model [Volume 4, Issue 2, 2020, Pages 205-216]

X

  • XOR Operation A two-stage rice-based lossless compression method for telemetry data [Volume 2, Issue 3, 2018, Pages 147-152]
  • XRD Synthesis, characterization and qualification of graphene for electronic applications [Volume 8, Issue 1, 2024, Pages 47-60]